DSSA Combo 64 Podręcznik - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik dla Sprzęt bezpieczeństwa DSSA Combo 64. DSSA Combo 64 9 stron.

Drukuj stronę

1. Disconnect Battery before doing any connection.

2. Connect Park Brake switch to Combo 64 Park Brake input.*

3. Connect Door Switch to Combo 64 Door Switch input.

4. Ensure that the polarity of BOTH switch(s), and set the DIP switch setting accordingly.

5. Connect the Battery to the Combo 64.

6. Ensure that the vehicle will not move when the Park Brake is released. Ensure the Park

Brake is ON and the driver door is closed.

7. Release the Park Brake, no alarm should be heard.

8. Open driver door, alarm should be heard. Wait 5 seconds to see if the (optional)

external alarm is activated.

9. Close driver door, alarm(s) should still be heard.

10. Apply Park Brake, both alarm(s) should stop.

* In case Park Brake Indicator on the dash board lights up after connecting the Park Brake Switch

to the Combo 64 Input, installer should install a separate Park Brake Switch for connecting to

Combo 64 instead of connecting the original one.

Hand Brake

Door Switch

1. Ensure the polarity of device connected to input

2. Inputs can be positive or negative switches

Configuration is done via DIP switch settings . Please

refer to installation manual .

Testing Procedure Day Time Running Lights

1. Disconnect Battery before doing any connection.

2. Connect Park Light/Ignition to the Combo 64 Park Light/Ignition Inputs respectively.

3. Connect Daytime Running Light to Combo 64 Daytime Running Light output.

4. Ensure that the polarity of Park Brake/Ignition, and set the DIP switch setting

accordingly.

5. Ensure the battery voltage is higher than the turn-on threshold. The threshold can be

adjusted via the DIP switch setting.

6. Connect the battery to the Combo 64.

7. Switch OFF BOTH Park Light/Head Lights, Daytime Running Light should turn ON after 5

Seconds.

8. Switch on Park Light, Daytime Running Light should turn OFF immediately.

9. Switch off Park Light, Daytime Running Light should turn ON after 5 seconds.

10. Switch on Head Lights, Daytime Running Light should turn OFF immediately.

11. Switch off Head Lights, Daytime Running Light should turn ON after 5 seconds.

For more information on ignition switching see last page.

Testing Procedure Park Brake Alarm

Output 4 Common

Output 4 NC

Output 4 NO

Input 6

Input 5

Input 4

Input 3

Input 2

Input 1

/output

Typical Park Brake Connection

Battery +

Battery -

Output 3

Output 2

Output 1

Battery +

Fuse

Car Battery

Fuse

Horn

S S

Digital witching ystems Australia

Battery -