ATTICAUDIO PASSIVE RE-AMP Instrukcja obsługi - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Transformator ATTICAUDIO PASSIVE RE-AMP. ATTICAUDIO PASSIVE RE-AMP 6 stron.
Drukuj stronęADJUSTING THE INTERNAL OUTPUT IMPEDANCE
1.
REMOVE THE BACKPLATE BY UNSCREWING THE FOUR SCREWS AT THE BACK OF THE
ENCLOSURE
2.
THE IMPEDANCE CAN BE SET SEPARATELY FOR THE TWO DIFFERENT OUTPUTS AS
INDICATED ON THE PCB
3.
USING A SMALL FLAT SCREWDRIVER, START WITH THE IMPEDANCE AT NOON AND
INCREASE OR DECREASE THE IMPEDANCE ACCORDING TO WHAT SOUNDS BEST
NOTE THE OUTPUT IMPEDANCE IS EXPECTED TO HAVE A MORE AUDIBLE EFFECT WITH A LOW OUTPUT LEVEL AND
ANALOG PEDALS SUCH AS FUZZ OR DISTORTION. LEAVE THE IMPEDANCE AT NOON FOR GUITAR AMPLIFIERS.
HALF
(12.5kΩ)
ZERO
FULL
(0Ω)
(25kΩ)
OUTPUT
IMPEDANCE