ATTO Technology FastStream SC 5300 Instrukcja instalacji

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Adapter hosta ATTO Technology FastStream SC 5300. ATTO Technology FastStream SC 5300 6 stron. Storage controllers for audio
Również dla ATTO Technology FastStream SC 5300: Specyfikacja techniczna (2 strony), Broszura (14 strony), Hot Sheet (2 strony), Podręcznik wyboru (1 strony), Podręcznik wyboru (1 strony), Macierz interoperacyjności (1 strony), Benchmark wydajności (2 strony), Cechy i korzyści (2 strony), Specyfikacje (2 strony)

Drukuj stronę
ATTO Technology FastStream SC 5300 Instrukcja instalacji
Verify the contents of your packing box
• ATTO FastStream SC 5300. Note the serial
number of your FastStream SC 5300 for later
use: ____________________________
• Power cord
• Ethernet cable
• RS-232 serial cable
• "L" brackets
• Setup CD including Express Power Center,
ExpressStripe, QuickNAV, Benchmark tool,
Celerity driver, installation guides and
Installation and Operation Manual
Install the Celerity storage adapter
1
Power off your computer and install the ATTO
Celerity storage adapter in the bottom PCI-X or
PCIe slot of your HP XW Workstation.
2
Power up your system.
3
Install the Celerity driver by clicking the
setup.exe file located in the Celerity folder on
the included setup CD. Follow the instructions
and continue to the next step.
N ote
®
Windows
users: click OK for each warning
message box presented.
© 2007 ATTO Technology Inc. PRMA 000-0365-000
Parity protection kit for MediaDock

Installation Guide

Install the FastStream SC 5300
1
Place the FastStream SC 5300 on a stable flat
surface or install it into a standard 19" rack by
attaching the supplied "L" brackets
2
Connect the Ethernet port to your network
using a Cat 5e Ethernet cable or better.
3
Connect your SCSI cables to the MediaDock™
II chassis in single bus mode or split bus mode.
See Exhibit 1 and Exhibit 2.
Exhibit 1 FastStream SC 5300 in single bus attached to
MediaDock II units
Exhibit 2 FastStream SC 5300 in split bus attached to
a MediaDock II
4
Connect the LC-LC Fibre Channel cables from
the FastStream SC 5300 to the Celerity storage
adapter.
5
Connect the AC power cord from the
FastStream SC 5300 to the proper AC source
outlet.
6
Turn on power to the FastStream SC 5300
using the switch on the back of the appliance.
..............................................................................
1