DT SWISS 240 OVERSIZE Podręcznik techniczny - Strona 8

Przeglądaj online lub pobierz pdf Podręcznik techniczny dla Akcesoria rowerowe DT SWISS 240 OVERSIZE. DT SWISS 240 OVERSIZE 14 stron.

3.4 REMOVING THE END CAPS

1. Using a suitable wrench, loosen the first end cap

and unscrew it from the axle.

→ 20 mm, 15 mm and 9 mm end caps: 22 mm

wrench

→ QR end caps: 5 mm hex key

2. Slide the disassembly tool onto the axle.

3. Tap the bearing out of the hub shell using the

disassembly tool and a hammer.

4. Fix the axle in the vise using the special fabric

tape.