Airtopia Control4 Instrukcje instalacji i użytkowania - Strona 5

Przeglądaj online lub pobierz pdf Instrukcje instalacji i użytkowania dla Kontroler temperatury Airtopia Control4. Airtopia Control4 8 stron.

Drukuj stronę

Driver Installation

1. The driver you have downloaded will be in a zip file. Double click on this file to open it in your preferred zip
program (WinZip, WinRar, etc.).
2. Extract the c4i file to the My Documents\Control4\Drivers directory. If you are using Windows 7 or 8 this will be
extracted to the Libraries\Documents\Control4\Drivers directory.
3. You are now ready to add and configure the driver via the Composer Pro software.

Adding the driver to your project

Note: Prior to starting this section please first set up the Airtopia device by following the installation manual included
with the product. In order to maintain reliable communications you will need to set the device up as a static IP address
or have a DHCP reservation for the device.
1. Launch the Composer Pro application and connect to your project
2. In the 'System Design' page select the 'Search' tab on the right hand side.
3. Type in 'airtopia' in the search field and hit the enter button
4. Double click on the 'Airtopia Climate Control' driver to add it to your project
Page | 5