Attop X-PACK 10 Podręcznik użytkownika - Strona 4

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Quadcoptery Attop X-PACK 10. Attop X-PACK 10 6 stron.

Drukuj stronę

(4) One Key Return

a. Press and hold the

button, then the drone will fly toward its back

following a path parallel to its original take-off path. The LEDs on the

drone keep flashing when the drone is returning.

b. Press and hold the

button again or move the Right Control Stick

forward to cancel this mode, or the drone will keep flying back.

(7) Photo / Video

Please connect the drone to your mobile device first, then go to the 'Media'

in app Home Page or your album file of the device to check your photos

and videos.

Press the

button to take a photo.

Press the

button to start recording a video; press it again to stop

recording and save the video.

Note:

It's NOT recommended to use this function during normal flight for landing,

which may result in serious damage for your drone.

(8) Altitude Hold/Hover

This is one of the default settings of the drone. When you release the Left

Control Stick after an ascent/descent action, the drone will hover at the

current flight height. For a stable flight, press the trim buttons to adjust

accordingly.

(9) Emergency Stop

Press and hold the

button, then the drone will stop in the air

and fall.

(5) High-Speed Rotation

Press the

button to make the drone rotate at high speed.

Press the button again or move the Right Control Stick to any direction

to exit this mode.

Note:

This function can't be activated when the battery of the drone is low.

(6) Circle Fly

In the case of barrier-free within 5m radius around the drone, press

the

button to fly the drone in a circle.

Press the button again or move the Right Control Stick to any direction

to exit this mode.

Note:

This function can't be activated when the battery of the drone is low.

10. FAQ

ISSUES

After the battery is

inserted in the drone,

Frequency matching

indicator lights on

between controller

drone keep flashing,

and receiver is not

and does not respond

successful.

to operation.

1.Check whther the

power for controller

No response after

and drone is fully

battery is inserted in

charged.

the drone.

2.Connection of the

poles are not good.

Motor does not run

when operating the

Power for the Li-Poly

throttle stick and the

battery is not enough.

indicator lights on

drone keep flashing.

1. Some of the blades

Main motor blades

have been deformed.

spin but the drone

won't fly.

2. Battery power is

not enough.

CAUSE

SUGGESTIONS

Reoperate the frequency

matching for controller

and drone. (please refer

to P.6 for details).

1.Open the remote

battery case and make

sure the battery is

inserted in right position.

2. Use a fully charged

battery.

3. Reinstall the battery

and confirm whether it is

of good connection with

the poles.

Charge the battery or

replace it with a

full charged battery.

1. Replace the main

blade.

2. Charge the battery or

replace it with a fully

charged battery.