dtec GJD 350 Podręcznik instalacji i konfiguracji - Strona 5
Przeglądaj online lub pobierz pdf Podręcznik instalacji i konfiguracji dla Czujniki bezpieczeństwa dtec GJD 350. dtec GJD 350 12 stron.
Drukuj stronęInstallation & Set Up Guide
Stage 2 –
ALARM OUTPUT 2
MULTIPLEXER, PTZ DOME,
DVR, ETC.
Stage 3 –
-
The GJD
pattern best suited to the cameras field of view. The 50 metre X 10 metre lens is
fitted to the unit when manufactured. If required this can be changed to the 50
metre X 5 metre lens which is supplied with the unit.
-
Movement across the beams produces the best response and range, whilst
movement towards the detector will be less responsive. The unit detects the
changes in heat and movement in the beam pattern, therefore items such as trees,
shrubs, ponds, boiler flues and animals should be considered when positioning
the detector.
Connecting the Unit
NORMALLY CLOSED
TAMPER CIRCUIT FRONT + REAR
0V SUPPLY
TO GJD LIGHTING CONTROLLER
TO GJD LIGHTING CONTROLLER
12VDC SUPPLY
- A S +
ALARM OUTPUT 1
MULTIPLEXER, PTZ DOME,
DVR, ETC.
fig. 7
Beam Alignment
is supplied with two Fresnel lenses to provide a beam
TAMPER CONNECTION
TAMPER CONNECTION
fig. 8
5