DTF AA-11IN-SHAKER Podręcznik użytkownika - Strona 7

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Suszarka DTF AA-11IN-SHAKER. DTF AA-11IN-SHAKER 7 stron. Powder applicator & dryer

• When the dusting box is not in use for the day, clean

the dusting box without powder to prevent the rubber

powder from dampening and to prevent powder or

motor jamming/burning. In case of powder blockage,

the powder spreading blade can be removed for

cleaning.

• After 2 uses, the rubber powder should be screened

with a 60 mesh screen before further use to prevent

the rubber powder and other impurities from blocking

the powder spreading mesh or the print.

• When adding powder, the action range should not be

too large to prevent the rubber powder from flying to

the platform. Because the rubber powder enters the

platform and is bonded with the film after heating, the

film cannot be collected by the collector.

• There are 4 oil drain ports inside the upper dryer,

which are usually plugged with 4 silica gel plugs. When

oil drainage is required, take out the silica gel plugs.