DTG M2 Instrukcja wymiany - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja wymiany dla Drukarka DTG M2. DTG M2 8 stron. Printhead cable replacement

M2 (PRINTHEAD CABLE REPLACEMENT)

(Always POWER DOWN printer and UNPLUG before doing any repair work)

13. Connect the FFC cables to your new printhead. Insure that you are placing the correct cable

into the correct slot on the head. Start with Slot one, and then insert slot two.

Fig 1-M

Insert FFC cables into new printhed. Start with the SLOT 1, and insure that the cable teeth are facing the

right way. Line up the cable into the SLOT before you push inn, be careful not to damage cable teeth.

14. Carefully re-seat the print head back into carriage. Be careful not to touch or damage the

printhead "FACE", push back on head and wiggle into position.

Ensure that the head is placed correctly, check that it is FLUSH with black plastic ramps on either

side.

(Indicated below 1-O)

Fig 1-N

Revision Date / Version: 2/13/2014 - 7

Fig 1-O

(Indicated below 1-M)

SLOT 2 (lower slot)

SLOT 1 (upper slot)

(Indicated below 1-N)

Ensure that printhead face is flush with

these plastic black "ramps"