DTI HV-500 Opis techniczny - Strona 4
Przeglądaj online lub pobierz pdf Opis techniczny dla Falownik DTI HV-500. DTI HV-500 18 stron.
Drukuj stronę
HV-500 TECHNICAL DESCRIPTION
_________________________________________________
LIABILITY AND SAFE USE OF THIS UNIT
DTI Controller hardware, DTI Tool and the DTI firmware are experimental products designed to develop
and test electrical systems incorporating electric motors or actuators. Electrical systems can cause danger
to humans, property and nature; therefore precautions shall be taken to avoid any risk. Under no
circumstances shall the device be used where humans or property are put to risk without thoroughly
validating and testing the whole system. Software and hardware interact in various ways, and developers
cannot foresee all possible combinations of hardware used together with software, nor problems that can
occur in these different combinations. Tool and the DTI firmware are experimental software designed to
develop and test. Electrical systems can cause danger to humans, property and nature; therefore
precautions shall be taken to avoid any risk.
Things that can happen, even when using the correct settings, are
•
electrical failure
•
fire
•
electric shock
•
hazardous smoke
•
overheating motors and actuators
•
overstrained power sources, causing fire or explosions (e.g.
Lithium Ion Batteries)
•
motors or actuators stopping from spinning/moving
•
motors or actuators locking in, acting like a brake (full stop)
•
motors or actuators losing control over torque production (uncontrolled acceleration or braking)
•
interferences with other systems
•
other non-intended or unforeseeable behavior of the system
DTI Tool and the DTI firmware are developer tools that for safety reasons may only be used
•
by experts and experienced users, knowing exactly what they do.
•
following safety standards applicable in the area of usage.
•
under safe conditions where software or hardware malfunction will not lead to death, injuries or
severe property damage.
•
keeping in mind that software and hardware failures can happen. We can't give any warranty
because every system is unique and we cannot make sure its safety. Although we design our
products to minimize such issues, you should always operate with the understanding that a
failure can occur at any point of time and without warning. As such, you shall take the
appropriate precautions to minimize danger in case of failure.
DTI does not assume any responsibility for difficulties, which are the result of inappropriate configuration,
electric system structure and settings that are not in accordance with the latest version of the manual for
DTI inverters.
Every inverter is tested before shipping. DTI assumes no liability in case a customer uses components for
the purposes for which they have not been developed or tested.
DTI reserves the right to change any information included this manual. All connection circuitry described
is meant for general information purposes and is not mandatory. DTI does not assume any liability,
expressively or inherently, for the information contained in this manual, for the functioning of the device
or its suitability for any specific application.
Revision 1.31
(BETA
VERSION)
4