ATW MINI 11 Podręcznik użytkownika - Strona 9

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Pompa ciepła ATW MINI 11. ATW MINI 11 18 stron. Air-to-water heat pump

10.2. SETTINGS

The Settings menu is divided into two rows of icons. The top row icons are used for the control of the UTI-INV

module (mode, equitherm regulation, HDW etc.), the bottom row icons are used to set the UTI-IQCP control panel

(language, time, network connection etc.).

Setting options:

Control (ON/OFF, Cooling/Heating, Summer/Winter)

Parameters setting (temperature sensors, operation limits, equitherm regulation etc.)

Reduction timer

Temperature sensors

Device information

Current time and date

10.2.1 Basic control

The control screen allows the setting of the devices main modes. The icons on the left show the current status.

There are three basic parameters:

On / Off - Turns the device on or off. In the ON state, all set programmes are running. In the OFF state, the divice does not

perform any action. It is possible that after swiching the device off, the circulation pump might still be running for a

while.

Heating / Cooling - In the heating mode, the device heats according to the heating curve, and heats the domestic hot

water. In the cooling mode, the device cools the water at a preset temperature, the HDW heating is not activated.

Summer / Winter - Choosing the season. In summer mode, the device only heats the HDW tank. In winter mode, all

heating operations are performed.

ON/OFF

Mode setting

Season setting

Language

Network setting

Sound setting

Backlight

Back

UTI-INV module

settings

UTI-IQCP control panel

settings

Back to the main screen

Status icons:

The device is OFF

The device is ON

The device is Cooling mode

The device is Heating mode

The device is Winter mode

The device is Summer mode