AddEnergie CoRe+PSV2 Instrukcja instalacji - Strona 10
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Ładowarka AddEnergie CoRe+PSV2. AddEnergie CoRe+PSV2 14 stron.
Drukuj stronęWall or Post Mounting
With electrical box
• IMPORTANT, never
remove the protection
plate of the keyhole.
• Attach the head base
to the wall or the post
with appropriate type of
anchors
• Hang the head base to an
anchor (previously fixed
to the wall or post) via
the keyhole at the top.
NEVER REMOVE THE
PROTECTION PLATE
• Complete the mounting of
the head base by installing
an anchor through the
bottom hole.
2016 ADDÉNERGIE TECHNOLOGIES INC. ALL RIGHTS RESERVED. Information and Specifications Contained in this Document are Subject to Change, Amendments, and Additions at any Time, Without Notice
GND
• Remove the backplate.
• Install the head base in order to align
the rectangular opening with the box
opening in the wall or the post.
L1 L2
• Connect two power
conductors (L1 and
L2) and the ground
conductor (GND)
• The grounding
conductor shall be
provided with green
or green and yellow
insulation.
10