Comtech EF Data CDM-625 -5V Instrukcja montażu - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Sprzęt sieciowy Comtech EF Data CDM-625 -5V. Comtech EF Data CDM-625 -5V 6 stron.

1. First turn OFF power and unplug the power cord. Remove the top cover by unscrewing (20) machine

screws with a #1 Philips screwdriver and locate the areas of interest. Save these screws for re-

assembling the unit.

 Verify the CnC module is installed, if not

2. Unplug power harness from J26 and remove (2) screws. One near C813 (Top Card) and one near J26

(Bottom Card).

WARNING - This document contains U.S.-origin data, the re-transfer of which is restricted by the Export

Administration Act and Export Administration Regulations (15 C.F.R. 770, et seq.)

STOP!

This rework only applies to units with CnC.

D-0020532 REV-D