ATZ HDMI-V2-44HE70 Skrócona instrukcja obsługi - Strona 11
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Przełącznik matrycowy ATZ HDMI-V2-44HE70. ATZ HDMI-V2-44HE70 16 stron. 4×4 matrix switch over hdbaset™ w/4x hdbaset receiver box 70m, 4k60 4:2:0 hdmi2.0 hdcp2.2
Drukuj stronęModel
: ATZ HDMI-V2-44HE70
Description : 4×4 Matrix Switch Over HDBaseT™ w/4x HDBaseT Receiver Box 70m,
4K60 4:2:0 HDMI2.0 HDCP2.2
HDBT Receiver
Number
1
POWER
2
DC 24V
3
HDBaseT In
4
HDMI Out
5
IR In
6
IR Out
7
RS-232
8
Connection
Signal
Lamp
9
Data
Indicator Lamp
Notes
: - All brand names and trademarks are properties of their respective holders and are referred to here for descriptive purpose only. Photo attached is for reference only, it may be slightly varied in items of colour,
shape from the actual item delivered from time to time.
Name
This LED illuminates when the device is connected with
power supply
Plug the 24V DC power supply into the unit.
Standard HD BaseT signal input port. Connect HD BaseT
transmitter with a UTP cable.
HDMI output port. This slot is where you connect the HDTV
or monitor with HDMI cable.
Channel 1 IR Receiver. Connect with Wideband IR Rx.
Channel 2 IR Transmitter. Connect with Wideband IR Tx.
Phoenix jack provide Serial port control signal from receiver
or to receiver.
I lluminate: The Transmitter and Receiver are in good
※
connection status.
Indicator
F lashing: The Transmitter and Receiver are in
※
poor connection status.
D ark: The Transmitter and Receiver are not connected.
※
Signal
I lluminate: The HDMI signal with HDCP.
※
F lashing: The HDMI signal without HDCP.
※
All specifications are subject to change without prior notice.
Function description
pg. 11
© Copyright ATZ