Comtrend Corporation GS-7260 Skrócona instrukcja obsługi - Strona 2
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Przełącznik Comtrend Corporation GS-7260. Comtrend Corporation GS-7260 2 stron. 5-port gigabit igmp switch
Drukuj stronę
C
Optional Wall Mounting Instructions
D
Troubleshooting
The following information should help you diagnose basic setup or installation problems.
1) POWER Indicator is OFF: If the Power LED goes off, please make sure that your power outlet is working properly
(perhaps by testing with another device).Then plug in your GS-7260 again. If the Power Indicator does not light up,
please contact your equipment supplier for further information.
2) NETWORK LED is OFF: If a LAN LED fails to light up, check that the LAN port of the Switch is connected firmly to the
LAN port of the other device. To check the condition of the Ethernet cable, use another cable to test the same
connection.
E
Congratulations, you are done!
FOR MORE HELP: For instructions on advanced features, FAQ, etc., please visit our online Product Webpage:
http://us.comtrend.com/products/public/product/home-networking/gs-7260.html
For more information:
Facebook:
https://facebook.com/Comtrend
Website:
http://us.comtrend.com/
Support: Visit our website or call 1-877-COMTREND (1-877-266-8736)
Step 3
Port 1
Step 1
*
Step 2
*
Make sure xDSL/Cable modem
is connected to Port 1.
Page 2