Comtrol Rocket linx ES8505-XT Instrukcja szybkiej instalacji - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja szybkiej instalacji dla Przełącznik Comtrol Rocket linx ES8505-XT. Comtrol Rocket linx ES8505-XT 8 stron. Es8508 series
Drukuj stronę
Optionally, select the appropriate Network Topology, which is an
9.
informational field.
10. Click the Apply Changes button.
11. Click Close to return to the main screen.
12. You are now ready to configure the ES8508 features.
LED INDICATORS
You can also view the LEDs for the ES8508 through the web interface
using the Device Front Panel page.
LED Name
LED On
SYS
Green: System ready
PWR1/2
Green: System power
ready
R.S. (Ring
Green: Ring is normal
Status)
Amber: Abnormal ring
DO1
Relay is active and
contacts have been
shorted
DI1
High digital signal is
detected
LNK/ACT
Port is linked
FEATURE CONFIGURATION
The ES8508 provides both in-band and out-band configuration methods:
Out-band management means that you configure the ES8508 using the
RS-232 console cable and the Command Line Interface (CLI) to access the
ES8508 without attaching an admin PC to the network. You can also use
out-bound management, if you lost the network connection to the ES8508.
LED Blinking
Green: Firmware
loading
Not applicable
Green: Ring with the
wrong port
Amber: The device's
ring port failed
Not applicable
Not applicable
Port active
6
LED Off
Power off
System not ready
Switch working in slave
mode
DO not activated
DI not activated
Port link down or port
not connected