Auber TH102 Instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Kontroler temperatury Auber TH102. Auber TH102 3 stron. Temperature and humidity controller

AUBER INSTRUMENTS

WWW.AUBERINS.COM

6. How to install the sensor to the unit.

The connector of sensor contains a slot for correct pin connection . It

also has a spring lock to prevent disconnections from accidental

pulling on the cable. To install the to the unit, please align the slot of

the female connector on the sensor to the red mark of the male

connec tor on the unit , then hol d the tail and push the female

connector forward. To remove the connector, please pull the spring

loaded collar of the female connector. Please see the Figure 3 and

Figure 4 below for details.

Figure 3. Install the Sensor

Figure 4. Remove the Sensor

Auber Instruments Inc.

5755 North Point Parkway, Suite 99

Alpharetta, GA 30022

www.auberins.com

e-mail: [email protected] Tel: 770-569-8420

No part of this manual shall be copied, reproduced, or transmitted

in any way without the prior, written consent of Auber Instruments.

Auber Instruments retains the exclusive rights to all information

included in this document.

2013.11

P3/3