Auber Instruments SYL-3615 Instrukcja obsługi - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Kontroler Auber Instruments SYL-3615. Auber Instruments SYL-3615 7 stron. Wi-fi bbq controller
Również dla Auber Instruments SYL-3615: Instrukcja obsługi (5 strony)
Drukuj stronę
AUBER INSTRUMENTS
Important Tip: Your phone may recognize that this wireless
signal from SYL-3615 has "no internet access" and may want
to switch to use mobile data or a different Wi-Fi signal. If your
phone prompts such a notification on the top of the screen,
please tap on it and select YES to stay connected.
f)
Once connected to the "AuberWiFi_xxxxxxxxxxxx" Wi-Fi
signal, click the "Continue" button on the lower-right corner or
manually switch back to AuberWiFi app if you are an iPhone
user.
g)
The next pop-up message box will ask you to confirm that
your phone has connected to the Wi-Fi signal generated by
the SYL-3615. Tap CONFIRM to go ahead with the paring
process.
h)
Once you tap on the CONFIRM button, the SSID and
password will be sent to the SYL-3615 so that it can log on to
your 2.4 GHz Wi-Fi network.
i)
If the pairing process is successful, the SYL-3615 will restart
and the blue LED will turn to solid. That means the device has
been connected to your router. In the meantime, the app will
return to the Device List page and a new SYL-3615 will
appear on this page.
j)
If the pairing process is unsuccessful, the App will remain on
the Add Device page. Please try again, and making sure you
check if the SSID is the desired wireless signal you want to
connect, if the password is correct, and wait a little bit long at
step (g) till the "no internet access" notification appears.
5. Programming a Cooking Profile
5.1 Single-Step Mode
By default, the SYL-3615 is initially configured to operate in single-step
mode with a set-temperature at 225°F. This means the controller will
attempt to maintain the pit temperature at 225°F indefinitely.
Note: In single-step mode, the Start and Stop function in the "P-Status"
(Program Status) parameter do NOT work.
To change the set temperature in single-step mode, short-press the SET
key on a SYL-3615 to access the cooking-profile menu. Navigate the
cursor to "Step:1" and press the SET key to enable editing the value.
Once you've finished editing the set value, press the SET key again to
save the new value. Use the BACK key to return to the normal operating
mode.
2024.01
P-Status: Step-1
>Step: 1
Figure 6. Move the cursor to Step 1 to edit the set value in the
single-step mode.
5.2 Multi-Step Mode
To enable the multi-step cooking profile, please go to the System
Configuration menu and change the parameter PRG to ON.
>PRG:
OL Detect
Figure 7. Change PRG to ON to enable the multi-step mode.
5.3 Multi-Step Cooking Profile
You can program up to 6 steps in a cooking profile, with each step
involving four parameters: pit temperature, ending criteria, step timer, or
food temperature. The table below explains how the settings in each
parameter affect the execution of a cooking step. Refer to Figure 8 for a
flow chart of how the parameters in a cooking step influence the cooking
process.
Table 2. Factors Involved in a Cooking Step.
Name
Range
Description
The set value of pit temperature of the current
Pit
-99°F ~ 999°F
step.
To end the current step when food probe
Food Temp
reading reaches a desired temperature.
Ending
Time
To end the current step by cooking time.
To end the entire cooking. The rest of steps in
End
this cooking profile will be ignored.
0:00 ~ 23:59
Cooking time, if the current step will end by
Timer
(hh:mm)
"Time".
Target food temperature, if the current step
Food
-99°F ~ 999°F
will end by food temperature.
WWW.AUBERINS.COM
Pit: 225
ON
ON
P3/7