Auber Instruments SYL-3615 Instrukcja obsługi - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Kontroler Auber Instruments SYL-3615. Auber Instruments SYL-3615 5 stron. Wi-fi bbq controller
Również dla Auber Instruments SYL-3615: Instrukcja obsługi (7 strony)
Drukuj stronę
AUBER INSTRUMENTS
Figure 10. Two mounting hooks installed on the back of a SYL-3615
7. FAQs
7.1. A probe shows "-H-" when it is plugged in.
The "-H-" is a probe input error message, which usually indicates that no
probe is connected or the probe is defective.
7.2. A probe reading appears to be jumping round.
Please swap with another good probe to see if the issue moves with the
probe or stays with the probe socket. If the probe connector is loose, the
wires inside the probe is broken or about to break, the reading may jump
around.
7.3. How to clean the probes.
Do NOT wash the probe. Only wipe the probe's stainless steel sheath
with damped paper towel or cloth. Please also keep water out of the
probe connector as well.
7.4. Can I leave the controller, the fan, and the probes
on the smoker after each cooking?
No, please do NOT leave them outside on the smoker. After each use,
keep them in a dry and cool environment.
7.5. What if I have one cooking step ends with food
temperature but I have no plugged in a food probe?
If a cooking step's" ending criteria is food temperature, however, no food
probe is plugged in, the controller will still maintain the pit temperature
but this step will never end.
(End)
2020.11
controller.
Auber Instruments Inc.
5755 North Point Parkway, Suite 99,
Alpharetta, GA 30022
www.auberins.com
E-mail: [email protected] Tel: 770-569-8420
Copyright 2007-2020, Auber Instruments All Rights Reserved.
No part of this manual shall be copied, reproduced, or transmitted in any way without
the prior, written consent of Auber Instruments. Auber Instruments retains the exclusive
rights to all information included in this document.
WWW.AUBERINS.COM
P5/5