ADDER View Secure Podręcznik użytkownika - Strona 9

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Przełącznik ADDER View Secure. ADDER View Secure 20 stron. Adderview secure

Connections to computer systems (continued)

Connecting video inputs

The unit provides full DVI/I connections for video. This means that it can receive,

and transfer, any VGA or DVI input (from analog to single or dual link digital) up

to the following maximum resolutions and rates:

• Analog: 1920 x 1200 x 60Hz

• Single link digital: 1920 x 1200 x 60Hz (up to 165MHz pixel clock)

• Dual link digital: 2560 x 1600 x 60Hz (up to two times 165MHz pixel clock)

Generally, all inputs should be of the same type, i.e. all analog or all digital (and

the monitor should correspondingly be of the correct type). However, there are

certain situations where mixing of different video types is possible - contact

technical support for more details.

The use of DDC information (automatically provided by the video display) could

cause issues in certain high security installations - please see the

(DDC).information

section on page 10 for further details).

To connect an analog video input

1 Wherever possible, ensure that power is disconnected from the unit and the

host computer(s) to be connected.

2 As appropriate, connect either a digital or analog video link cable to the

required DVI/I socket on the rear panel:

• Digital Connect a digital video link cable to the port labelled

the appropriate channel group on the rear panel.

• Analog Connect a converter module to the port labelled

the appropriate channel group on the rear panel. Connect an analog

video link cable to the converter module. In both cases, ensure that the

securing screws are used to maintain reliable links.

3 Connect the plug at the other end of the cable to the corresponding video

output socket of the appropriate host computer.

Video.display.

within

5 V

2 . 0

Digital video input

5 V

2 . 0

Analog video input