Conair BTS4C Series Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Masaż Conair BTS4C Series. Conair BTS4C Series 10 stron. Dual jet bath spa cordless
Również dla Conair BTS4C Series: Instrukcja obsługi (4 strony)

Drukuj stronę
Conair BTS4C Series Instrukcja obsługi
FITTING AND REMOVING FILTER CAPS
TO REMOVE CAPS
1) Turn cap about 20˚ counterclockwise (Fig. 7).
(Filter caps are located on either side of the motor assembly.)
2) Line up single hash mark on cap with
the center seam on the back body of the unit.
3) Pull cap away from unit.
4) Rinse cap under water to remove hair, lint, etc.
TO REPLACE CAP
1) Push cap into body so that single hash mark
on cap lines up with the center seam
on the back body of the unit.
2) Turn cap clockwise about 20˚ until the double
hash marks on the cap line up with the center
(Fig. 7)
seam on the back body of the unit.
WARNING: Protect from excess lint, hair, etc... from easily getting caught
in motor, unit should never be used with the filter mesh removed. Injury
or damage to unit could result.