dams SLAB 25 SLBT1790 Podręcznik - Strona 4
Przeglądaj online lub pobierz pdf Podręcznik dla Wyposażenie wnętrz dams SLAB 25 SLBT1790. dams SLAB 25 SLBT1790 16 stron. Dining table
Drukuj stronę
1
Step 1
Insert the maxifix cams into the
pre drilled holes on the support
brace. The cam should be
inserted as per diagram A.
Repeat for both braces.
2
Step 2
Screw in the connector pins
into the pre drilled holes on
the panel. Ensure the screw
is inserted correctly as per
diagram B. Repeat for both
braces.
4
QUANTITY - 8
35mm Maxifix Cam
QUANTITY - 4
Furniture
Connector Pin
35mm Maxifix Cam
Ensure the arrow on
this fitting is aligned
with the hole that is
drilled on the edge of
the panel.
ü
û
Furniture Connector Pin
Ensure this pin is correctly inserted
into the panel. The flat rim of this pin
should sit against the edge of the
panel.
û
Incorrect - This has been overtightened and you can
no longer see the rim of the screw.
ü
Correct - This has been inserted correctly.
The rim sits perfectly against the face of the panel.
û
Incorrect - This hasn't been tightened
enough and you can no see a visible gap
between the rim and the panel.
Diagram A
Diagram B