DAN NTP TECHNOLOGY DAD Thunder Core 256 Instrukcja instalacji - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Sprzęt nagrywający DAN NTP TECHNOLOGY DAD Thunder Core 256. DAN NTP TECHNOLOGY DAD Thunder Core 256 16 stron. Thunderbolt 3, dante, madi and adat digital audio interface
Drukuj stronęInstallation Guide Core 256
Connect your Core 256 to DADman
Core 256 can be controlled via Thunderbolt or Ethernet. At the first start-up, the the DADman window may be
blank as no units are yet connected. In the top menu bar, select Tools/Device List and the window will show a list
of the discovered units. If the unit is connected via Thunderbolt this will appear in the list. If there is no
Thunderbolt connection, the units can be connected via Ethernet. If a unit on the Ethernet does not appear in
the list, apply 'Refresh' when using a Windows PC in order to discover the Core 256 over Ethernet. On MacOS,
'Action' is used to select 'Refresh IP list' The Device List window is shown in figure 1. A unit will always be
discovered but depending on your network configuration it will have to be set to DHCP or Manual IP addressing.
In order to attach the unit to DADman the connect box has to be checked.
Note. If the DAD Thunder|Core Thunderbolt driver is installed on the computer where DADman is
running, the software will automatically connect via Thunderbold to Core 256 and not via Ethernet.
Assigning the IP address for the computer and the Core 256
When the DADman program is installed, you are able to finalise the network configuration of Core 256. You have
the option of using fixed IP addresses or IP addresses assigned via DHCP. DHCP can be auto assigned via the
Ethernet by itself or via an external DHCP server providing IP address for all units on your network.
Fixed IP address
You must have a preferred range of IP addresses, and a network mask for the computer network and the
connected Core 256 units.
1.
Configure your computer IP address and network mask via the computer control panel to e.g. 10.0.7.25 |
255.255.255.0
Select Core 256 in the DADman Settings/ Device List menu by right clicking on the unit line and select 'Network
settings' when using a Windows PC. On MacOS you use the 'Action' button to select 'Network Settings'.
Doc no. AXCNTR-8001-A-4
Figure 2, DADman Device list
Rev. date 201123
Page 7 of 16