Dan Clark Audio AEON 2 Skrócona instrukcja obsługi

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Słuchawki Dan Clark Audio AEON 2. Dan Clark Audio AEON 2 3 stron.

• Read instruction manual carefully and completely before

using this headphone.

• Keep the headphone, accessories, and packaging out of

reach of pets and children. This product contains small

parts which may present a choking hazard.

• Use only attachments, accessories, and spare parts

supplied or recommended by Dan Clark Audio.

Boot

Metal Jacket

Safety Instructions

Headphone Fit Adjustments

Adjust slider up or down

on both left and right sides

for proper t.

Attaching a Cable

*click*

Features

Driver: 62mm x 34mm Dan Clark Audio designed

single-ended planar magnetic.

Titanium "Memory Metal" headband.

Leather comfort strap.

Synthetic leather ear pads.

Matched drivers: +/- 0.5dB between 100-7KHz

• Protect your hearing from high volume levels. Permanent

hearing damage can occur when headphones are used

at high volume levels for extended periods of time.

• Do not expose headphone or accessories to extreme

temperatures.

• Always keep headphone dry.

You can adjust the t of your heaphone by re-positioning

the headband slider. To adjust the headband move the

sliders up or down until you achieve your desired

t. It may benecessary to remove thick glasses or hats to

achieve a proper seal between your head and ear pad.

An improper t cancause a bad seal resulting in poor

bass response.

Tip: Try inserting the arms of your glasses into the top of

the ear pad instead of resting them directly on your ears.

All Dan Clark Audio planar-magnetic products use

Hirose-style connectors. To attach your cable hold the

male connector by the boot and rotate it into the female

receptacle on the headphone until you feel it click into

place. To release the cable, pull down on the top of the

connector's metal jacket.