Dan D'Agostino PROGRESSION Instrukcja obsługi - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wzmacniacz Dan D'Agostino PROGRESSION. Dan D'Agostino PROGRESSION 14 stron.
Drukuj stronę
LEGAL NOTIFICATIONS
Dan D'Agostino Master Audio Systems is a registered trademark of Dan D'Agostino Master Audio
Systems, LLC (DDMAS). The information in this owner's manual is subject to change without
notice. Current Version 1.0 of this manual was produced by the DDMAS engineering, sales and
marketing departments.
The information in this manual is the sole property of DDMAS. Any reproduction in whole or
part without the expressed written permission of DDMAS is prohibited. No material herein may
be transmitted in any way including either electronic or mechanical methods for any purpose
without expressed written permission of DDMAS.
CAUTION:
NO USER SERVICEABLE PARTS INSIDE. Do not open the amplifier's chassis or remove
any of its screws. Contact DDMAS or your dealer if you have service needs.
WARNING:
Do not expose this amplifier to moisture or excessive humidity, and do not use it
outdoors. Fire hazard may result.
The lightning flash with arrowhead, within an equilateral triangle, is intended
to alert the user to the presence of uninsulated "dangerous voltage" within the
product's enclosure that may be of sufficient magnitude to constitute a risk of
electrical shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating maintenance (servicing) instructions in the
literature accompanying the appliance.
PACKAGE CONTENTS
If any of the following items are missing, please contact your dealer:
✔ 1 Progression Integrated Amplifier
encased in protective packaging
✔ 1 Remote control
✔ 2 AAA batteries
✔ 1 Philips head screwdriver
✔ 1 Bluetooth antenna
2
✔ 1 WiFi antenna (if optional
digital module is installed)
✔ 1 Owner's manual
✔ 1 AC power cord
✔ 2 Lifting gloves
UNPACKING AND INSTALLATION
Unpacking the Progression Integrated Amplifier from its case
While the Progression Integrated Amplifier is still in its case, please move it to a location near
the place where it will be installed. Remove all jewelry including watches, rings and belts from
your person to avoid damage to the exterior of the Progression Integrated Amplifier during the
removal and installation.
The finish of the Progression Integrated Amplifier is durable but can be damaged. To protect its
pristine surface, we strongly suggest wearing the supplied white lifting gloves when handling
to avoid abrasion, fingerprints caused by oils from skin, etc. See Operation: Maintenance for
instructions on cleaning.
Installation requirements
This component's dense metal chassis makes it much heavier than most other integrated
amplifiers, so make sure the surface that will support this component can safely hold its weight.
Adequate ventilation must be provided for the amplifier. There should be at least 3 inches of
clearance on each side and 3 inches of clearance at the top. The bottom vents must not be
obstructed by thick carpet, dust, etc. We recommend that the amplifier be installed in an open
equipment rack to assure proper ventilation. The amplifier may be installed in a closed cabinet
or in an equipment closet, but the space must be designed with substantial ventilation at top
and bottom; active ventilation (i.e., powered fans) is preferred. Do not place the amplifier directly
on a carpeted floor.
Do not plug the Progression Integrated Amplifier or any other Dan D'Agostino Master Audio
Systems product into a power strip or power conditioner.
Returning the Progression Integrated Amplifier for service
If you should need to return the amplifier for service, be sure to use the original box and
materials for shipment. Before you ship the amplifier, unplug it from the wall and let it cool down
for 2 hours. To protect the finish during shipping, rewrap the amplifier in the protective packaging
in which it was originally shipped. Make sure the amplifier is completely cool. Wrapping the
amplifier when it is warm will cause the plastic wrapping to leech into the amplifier's surface
and will permanently damage the finish.
Configuration
The Progression Integrated Amplifier is a modular design that can be used with line-level analog
sources. An optional phonostage can be added for use with a turntable. Additionally, an optional
digital module gives access to cloud-stored and locally stored (NAS drive, computer, etc.) music
files, as well as access to subscription streaming services. Wired network connections are preferred,
especially if you are streaming high-resolution audio files to the Progression Integrated Amplifier.
3