AirTurn BT200S Instrukcja obsługi - Strona 13

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Kontroler AirTurn BT200S. AirTurn BT200S 19 stron. Hands-free bluetooth controllers for bluetooth 4 tablets and computers

Drukuj stronę

If any firmware updates are available, you will be notified after

the App has connected. After performing the update, the BT200S

will install it and shut down. Remove the pairing from your

iOS/Android/PC/Mac device, power on the BT200S, and

reconnect.

UNIT IDENTIFICATION

The unit name in your Bluetooth host consists of several codes to

help with support and identifying your specific device. For

example:

V2.1.0 refers to the firmware number.

ABCD refers to the MAC address.

This is helpful if there are many BT200S units in the same location.

Your MAC address will always be the same so you can easily

identify your unit. You will find your specific MAC address

labeled on the bottom of your BT200S at the end of the serial

number.

CARE OF YOUR BT200S

Wipe down using a damp cloth with a mild detergent or soap-

based cleaner to remove dirt and stains from your BT200S.

• Do not get the BT200S wet or place in direct sunlight for

extended periods of time.

• Do not open the unit, as there are no user serviceable parts.

• Do not put in trash. Please recycle.

BT200S v2.1.0 ABCD