DAN DRYER 3000 Instrukcja konserwacji i obsługi - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja konserwacji i obsługi dla Suszarka DAN DRYER 3000. DAN DRYER 3000 13 stron. Hand dryer

Reference

Version

3000-ENG

08.01.2018

Sensing range adjustment:

The sensing range of the hand dryer is preset by the manufacturer.

We recommend that the sensing range is NOT adjusted by the user.

If you wish to modify the sensing range anyway, please proceed according to the following instructions:

1. Cut off the power supply to the hand dryer

2. Remove the cover by loosening the Allen screws at the

bottom of the housing. This can be done with the special

Allen key originally supplied with your hand dryer.

3. The sensing range adjusting screw is located as shown

in Fig. 1.

Use a tiny screwdriver to carefully turn the adjusting screw.

a. Turn clockwise to lengthen the sensing range.

b. Turn counter-clockwise to shorten the sensing range.

4. Remount housing and test run the hand dryer.

Turn clockwise to lengthen

the sensing range

Fig. 1.

Air speed adjustment:

If a lower noise level is desired, air speed may be

adjusted by turning the adjusting screw located

inside at the bottom of the hand dryer cover.

Turn clockwise to increase air

speed and anti-clockwise to

reduce air speed.

DAN DRYER A/S • Alsikevej 8 • DK-8920 Randers NV • www.dandryer.com • [email protected]

Document

3000 DAN DRYER Hand dryer.

Maintenance and service manual

Turn counter-clockwise to

shorten the sensing range

Lang.

Remove the

cover screws

Page

4 of 12