concept 2 DYNO Instrukcja montażu - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Sprzęt fitness concept 2 DYNO. concept 2 DYNO 12 stron.

Pull side

19. Attach the Seat Backs to the Front and Rear Legs as shown. Note that the larger Seat Back goes on

the Push side, the smaller goes on the Pull side. Use two 3/8" by 2 5/8" bolts and 3/8" nuts for each

Seat Back.

20. Refer to this photo to make sure you have assembled your Dyno correctly.

Please read the User's Manual before you get started.

Check all fasteners.

Push side

11/01