ADDER CUSBEXT100 Szybki start - Strona 2

Przeglądaj online lub pobierz pdf Szybki start dla Przedłużacz ADDER CUSBEXT100. ADDER CUSBEXT100 2 stron. C-usb cable extenders

Host computer USB connection

Use the supplied USB cable to link the local

module to a vacant port on your computer.

Local module

Link cable

Use only CAT 5e or better twisted pair cabling

to a total length no greater than 100 meters.

Connect the power

adapter to the power

jack on either module.

Note

Never connect power adapters to the local and

remote modules simultaneously as this may cause

permanent damage to one or both modules.

Power adapter

Once connected to one of the modules, use the supplied

power cord to join the power adapter with the nearest

wall outlet.

Remote

module

Checking the installation

On the local and remote modules, check that their green indicators are on. The green indicators

signify that the modules are powered up; have a USB connection to your system and are joined by a

suitable link cable.

If the green indicators are not on, check the three key items mentioned above.

If the green indicators are flashing, either the link cable is faulty or there may be a mismatch

between the firmware held within the modules. Contact Adder technical support for assistance.

USB device connection

Connect the plug of your USB device

to the socket on the remote module.