Abt KODE507EBL Instrukcja instalacji - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Piekarnik Abt KODE507EBL. Abt KODE507EBL 20 stron. 27" (68.6 cm) and 30" (76.2 cm) electric single and double built-in oven flush installation kit

Drukuj stronę

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."

These words mean:

DANGER

WARNING

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

Tools and Parts

Gather the required tools and parts before starting installation.

Read and follow the instructions provided with any tools listed here.

Tools Needed

Phillips screwdriver

■

Measuring tape

■

Drill (for wall cabinet installations)

■

" (3 mm) drill bit (for wall cabinet installations)

■

Level

■

Flat-blade screwdriver

■

Parts Needed

#8-14 x 1" (2.5 cm) screws - (2) single ovens, (4) double

■

ovens included with built-in oven

(2) #8-18 x

" (9.5 mm) screws - bottom vent included with

■

built-in oven

(4) #8-18 x

" (9.5 mm) screws - double oven feet included

■

with

built-in oven

Bottom vent included with built-in oven

■

(2) feet double oven included with built-in oven

■

(2) front feet double oven included with built-in oven

■

Parts Supplied

Deflector bracket

■

Plastic spacers - (2) single ovens, (4) double ovens

■

#8-18 x

" (3 mm) screws - (2) for 27" (68.6 cm) models), (4)

■

for 30" (76.2 cm) models

BUILT-IN OVEN SAFETY

Your safety and the safety of others are very important.

INSTALLATION REQUIREMENTS

You can be killed or seriously injured if you don't immediately

follow instructions.

You can be killed or seriously injured if you don't follow

instructions.

Location Requirements

IMPORTANT: Observe all governing codes and ordinances.

NOTE: Refer to the following "Location Requirements" and the

"Location Requirements" section of the Installation Instructions

provided with your built-in oven.

Cabinet opening dimensions that are shown must be used.

■

Given dimensions provide minimum clearance with oven.

Recessed installation area must provide complete enclosure

■

around the recessed portion of the oven.

Oven support surface must be solid, level, and flush with

■

bottom of cabinet cutout.

Floor must be able to support a single oven weight of

■

129 lbs (59 kg) for 27" (68.6 cm) models or 154 lbs (70 kg) for

30" 76.2 cm) models.

Floor must be able to support a double oven weight of

■

251 lbs (114 kg) for 27" (68.6 cm) models or 288 lbs (131 kg)

for 30" (76.2 cm) models.

IMPORTANT: To avoid damage to your cabinets, check with

your builder or cabinet supplier to make sure that the materials

used will not discolor, delaminate, or sustain other damage. This

oven has been designed in accordance with the requirements

of UL and CSA International and complies with the maximum

allowable wood cabinet temperatures of 194°F (90°C).