ducduc Verona Instrukcja montażu - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja montażu dla Wyposażenie wnętrz ducduc Verona. ducduc Verona 10 stron. Verona bed conversion kit
Również dla ducduc Verona: Instrukcja montażu (9 strony)
Drukuj stronę4
Place END RAIL
Secure END PANEL
WASHERS
Place other END RAIL
inside of crib. Secure END RAIL
LOCKING WASHERS
Secure SIDE RAIL
REGULAR WASHERS
It may be easier to access the top frame connector holes by laying the frame on its side (place on
a blanket to prevent scraping). Also, only slightly tighten bolts until all of them are in place and
aligned. Tighten all bolts with ALLEN WRENCH
mattress support holes
base connector holes
onto BASE
to BASE
, and REGULAR WASHERS
on the opposite side with mattress support holes facing the bottom and
to BASE
, and REGULAR WASHERS
with BASE CONNECTOR BOLTS
from underneath as shown below. Tighten all bolts with ALLEN WRENCH
B
Back
A
with mattress support holes facing the bottom and inside of crib.
with BASE CONNECTOR BOLTS
from underneath as shown below.
with BASE CONNECTOR BOLTS
from underneath as shown below.
.
A.1
J
L.2
I
base connector holes
, LOCKING
, LOCKING WASHERS
K.2
,
, and
.
J
G
base connector holes