AnyTone SMART Podręcznik użytkownika - Strona 9
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Radio AnyTone SMART. AnyTone SMART 9 stron. 10 meter amateur mobile radio
Również dla AnyTone SMART: Instrukcja obsługi (3 strony)
Drukuj stronę
Qixiang Electron Science & Technology Co.,Ltd
Our
energy during transmit mode. This radio is designed for and classified as"Occupational Use Only",meaning it must be
used only during the
course of employment by individuals aware of the hazards, and the ways To Minimize Such hazards.
This radio is NOT intended for use by the"General Population" in an uncontrolled environment. This
radio has been tested and complies with the FCC RF exposure limits for"Occupational Use Only".
Qixiang Electron Science & Technology Co.,Ltd
In addition, our
and Guidelines with regard to
RF energy and electromagnetic energy levels and evaluation of such levels for exposure to humans:
---IEEE Std. 1528:2013 and KDB447498, Evaluating Compliance with FCC Guidelines for Human
Exposure to Radio Frequency Electromagnetic Fields.
---American National Standards Institute (C95.1-1992), IEEE Standard for Safety Levels with
Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz.
---American National Standards Institute (C95.3-1992), IEEE Recommended Practice for the
Measurement of Potentially Hazardous Electromagnetic Fields-RF and Microwave.
The information listed above provides the user with the information needed to make him or her aware
of RF exposure, and what to do to as-sure that this radio operates with the FCC RF exposure limits of this radio.
Electromagnetic Interference/Compatibility
Qixiang Electron Science & Technology Co.,Ltd
During transmissions,
cause interference with other
devices or systems. To avoid such interference, turn off the radio in areas where signs are posted to do so. DO
NOT operate the transmitter in areas that are sensitive to electromagnetic radiation such as hospitals, aircraft,
and blasting sites.
Occupational/Controlled Use
The radio transmitter is used in situations in which persons are exposed as consequence of their employment
provided those persons are fully aware of the potential for exposure and can exercise control over their exposure.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority
to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
radio generators RF electromagnetic
radio complies with the following Standards
radio generates RF energy that can possibly