DuctSox U-Track Instrukcja instalacji - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Urządzenia przemysłowe DuctSox U-Track. DuctSox U-Track 16 stron.

T's

There should be roughly 12" (305mm) from sidewall of DuctSox to start of the branch track. Track too

close to the main run may cause premature failure due to abrasion from the track.

Support around fabric fittings may require additional track supports.

NOTE: Offset distance of branch U-Track from main trunk is approximately half of the main trunk diameter

plus 12" (305mm).

12"

(305mm)

12"

(305mm)

Installation Guide: U-Track