Anywave RF Podręcznik użytkownika - Strona 13

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Kontroler Anywave RF. Anywave RF 20 stron. Switch controller

Drukuj stronę

4 Manual Switching - Setup and Operation

Manual mode: Set the switch controller to LOCAL mode from its front
panel
Set the switch controller to LOCAL mode from its front panel then
1)
the controller will change from auto to manual in STATUS-> MODE in
web page as shown in Figure 11.
The front panel T1 button stands for amplifier A and T2 stands
2)
for amplifier B. Once the T2 button is pressed, the controller will turn off
both power amplifiers first and then control the coaxial switch to switch
to amplifier B and then bring amplifier B back to full power, as shown in
Figures 12 and 13.
RF-SWITCH-USR-DOC-V2.0, 1/6/2017
Figure 11
(Change to manual mode)
RF Switch Controller User Manual
Page 13 of 20