Anywhere Cart AC-PLUS Instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Ładowarka Anywhere Cart AC-PLUS. Anywhere Cart AC-PLUS 8 stron.

Drukuj stronę

Electrical Troubleshooting

Identifying Components
Power
Strip 3
GFCI
Power
Module
Input
Step 1:
Testing the GFCI Module
1.
With your cart plugged in, open the rear panel door.
2.
Locate the
GFCI Module
3.
Press down on the Yellow Button (Test).
4.
Then press the Red Button (Reset).
5.
Allow 5 seconds for the
6.
If
resetting the
GFCI Module
Step 2:
Testing the Power Cord
1.
Unplug your cart and remove cords from both ends of the
2.
Plug the main Power Cord into the
left side of the
Charging
3.
Plug the cart back into a wall outlet and press the internal
labeled PWR on the
4.
If the system does not power on, verify that your Power Cord is not
damaged by plugging in a PC monitor style IEC-320-C13 Power Cord.
5.
If the system powers on, replace the Power Cord, otherwise
Step 3:
Testing the Power Strips
1.
Open the rear panel door and locate the 4 vertically mounted
2.
Verify each switch is in the "RESET" position, not the "OFF" position.
3.
Using an extension cord, test each
from the charging system and plugging them into the extension cord.
4.
If one or more
Power Strips
© 2017 Anywhere Cart | 42400 Winchester Rd Temecula, CA 92590 | 888-650-4488 | www.AnywhereCart.com
Power
Strip 1
Switch
Cable
Charging
System
Power
Button
on the left side bottom of your cart.
Charging System
to reset.
did not correct the issue, go to Step 2.
Power Input
System.
Charging
System.
Power Strip
no longer works, replace as needed.
9 Outlet Power Strip for AC-PLUS, AC-PLUS-T
12 Outlet Power Strip for AC-45
Specifications subject to change without notice
Power
Strip 2
GFCI
Module.
port located on the
Power Button
go to
Step 5.
Power
Strips.
by unplugging each cord
Strip 4
Layout may vary depending on model
Part # 1320399
Power
Part # 1322859
Part # 1320953
Part # 1323853