Anywhere Fireplace Chelsea 90298 Instrukcja instalacji - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Kominek wewnętrzny Anywhere Fireplace Chelsea 90298. Anywhere Fireplace Chelsea 90298 4 stron. Chelsea 90298 fireplaces
Drukuj stronę
MOUNTING INSTRUCTIONS
Use a level to mark a straight line with a pencil on the wall where you will mount the brackets.
The wall should be made from drywall, tile, brick, stone, ect. It must not be flammable (e.g. no
wallpaper or wood) Make sure you mount the fireplace at least 4 feet away from any drapes or
flammable materials.
The brackets should be spaced 4 inches apart. Mark bracket hole locations on the wall with a
pencil keeping them level with the line previously drawn.
Step 2
Using a 3/8" drill bit, drill holes into the wall on the 4 spots where you marked the bracket hole
locations.
Step 3
Insert the wall anchors flush into holes in wall as shown in figure 3. A light tap with a hammer
might be necessary to insure it is inserted flush with the wall. If you drill a hole into a wooden
stud, the wall anchor is not necessary.
NOTE: The wall anchors provided are intended to be used in drywall. If mounting on another
wall surface, make sure you have the proper mounting hardware.