Duerkopp Adler 0511 590024 Instrukcja montażu - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Maszyna do szycia Duerkopp Adler 0511 590024. Duerkopp Adler 0511 590024 12 stron. For laser marking

Drukuj stronę

Duerkopp Adler 0511 590024 Instrukcja montażu

Anbauanleitung für Lasermarkierungsleuchten

Laser marking lamp activation

7.1 Switching on a laser marking in addition to a specified seam program

Ausgabe/Edition:

Änderungsindex

07.2010

Rev. index: 00.0

Teilesatz 0511 590024

Fitting Instruction for laser marking

Kit 0511 590024

The laser marking lights are optional assemblies and thus must be

registered in the control unit.

–

Switch on the sewing machine. Press the "F" key.

–

Enter the code "25483 " and confirm by pressing the "OK" key.

–

Select the menu item "machine" and enter the sub menu by

pressing the "OK" key.

–

Select the menu item "equipment" and enter the sub menu by

pressing the "OK" key.

–

Select the menu item "configuration" and enter the sub menu

by pressing the "OK" key.

–

Select the menu item "Laserlamps" (laserl.) and enter the

editing mode by pressing the "OK" key.

–

Set the function to "ON" with the "é" key and confirm it by

pressing the "OK" key.

–

Switch to the main menu by pressing the "ESC" key .

The laser marking lamps can be linked with the basic programs

and variants.

Linking the switching on of a laser marking to a basic program :

–

Select the basic program from the main menu.

–

Select the menu item "

pressing the "OK" key.

All the laser marking lamps will be displayed in this menu.

–

Select the corresponding number of the laser marking lamp 1,2

or 3, activate it through pressing the "OK" key, use the "é" key

to set its status to "ON" and confirm your choice by pressing

the "OK" key.

It is possible to operate simultaneously all three laser marking

lamps.

Linking the switching on of a laser marking to a variant :

–

Press the key "P".

–

Select the menu item "

pressing the "OK" key.menu item „

–

Select the corresponding number of the laser marking lamp 1,2

or 3, activate it through pressing the "OK" key, use the "é" to

set its status to "ON" and confirm your choice by pressing the

"OK" key.

It is possible to operate simultaneously all three laser marking

lamps.

Attention !

It is possible to connect up to nine laser marking lamps.

Three laser marking lamps connected in parallel to the three

switchable outputs could be switched on each time.

" and enter the submenu by

Printed in Germany

Teile-Nr./ Part-No.:

0791 511700

Blatt:

von

Sheet: 11 from 12