Concox GK306 Podręcznik użytkownika - Strona 9
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Akcesoria dla niemowląt Concox GK306. Concox GK306 12 stron. Children safety monitor
Note: GPS can only be located outdoor. It cannot be located indoor, or under the shade of tree, or
around tall buildings where has low GPS or even no GPS signal, while LBS can be located
anywhere with GSM signal.
7 Monitor
Monitoring function is only available for 4 family numbers and SOS number.
SMS command: Monitor#
The device will dial the number which just sent the command. The user of the specific number
can answer the phone and then enter monitoring state.
8 Appendix
8.1 Battery Safety
● Please use the original battery. The warranty will be invalid by using any other accessory. The
manufacturer will not take any responsibility if the device gets damage.
● The new battery need 2-3 days for charging full power and finishing all power to get the best
condition.
● The battery can get full charge and finish all power over and over hundreds times. When the
battery using time becomes shorter obviously, please change a new one.
● Cut off power supply if not using the charger, don't charge the battery more than one week,
over charging will reduce the battery using time.
● Do not short-circuit the battery with metal stuff (like the key in your pocket)
● Do not bend or open the battery.
● Do not put the battery into water or fire.
● The battery should be charged at room temperature.
● The battery should never be charged at temperatures of below 0 degrees or above 45 degrees
Celsius.
8.2 Use and maintain
Children Safety Monitor is a high technology product, please use with caution. The advices below
can help you know how to use and maintain the device.
● Keep away the accessory of children's reach.
● Keep the device dry, the water and moisture will corrosion circuit.
● Do not keep or use the device in a dusty place.
● Do not keep the device in heat, it will reduce the device using time, damage battery and plastic
accessories.
● Do not keep the device in low temperatures. When the device is transferred in high