Anywire ARW-03 Instrukcja obsługi produktu - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja obsługi produktu dla Napęd Blu-ray Anywire ARW-03. Anywire ARW-03 17 stron. Address writer
Również dla Anywire ARW-03: Instrukcja obsługi systemu (6 strony)
Drukuj stronę[Writing of addresses...Notes]
There are two writing modes as follows. Understand it to select the mode.
Mode
WRITE
DIRECT WRITE
If using a branching/disconnection function, set all the addresses and then register the connection ID on the
master side by performing "automatic address recognition operation."
If "automatic address recognition operation" is performed on the master side, when connection ID is registered to
change an address, it will cause a disconnection error.
In this case, perform "automatic address recognition operation" and then register the connection ID again.
When the power of the terminal and transmission
signals are turned off after the writing operation and
turned on again, the written values become available.
In consideration of safety of the system, writing in
this mode is recommended normally.
The written values become available at the time when
addresses are written.
As addresses can be updated with the power on, this is
an easy method. However, it requires careful attention
to operation so that unexpected terminal movement
may not cause an accident.
-ARW03 9/17-
Details
DIRECT WRITE
WRITE
Light emitting and receiving part
(yellow frame)