Danby DDW1805 Instrukcja serwisowa - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja serwisowa dla Zmywarka Danby DDW1805. Danby DDW1805 16 stron. Dishwasher division 22 461
Również dla Danby DDW1805: Instrukcja serwisowa (12 strony), Instrukcja serwisowa (15 strony)
Drukuj stronę
Library imaging System
Figure 5
4.
Install new door latch assembly
and reverse procedures
to complete
repairs,,
FLOAT SWITCH ASSEMBLY
The water float assembly
is located
in the right lower side of the dishwasher
(the
portable
located
behind
the lower front crosspiece)..
When too much water
enter
the dishwasher,
the water will enter the float support
through
the overflow
pipe,
the float will make the floating
.switch acts, the electrical
supply to the water valve
will disconnected
and the drain pump keep on working.
If the switch fails to operate,
check the following:
o Loose connection
at the switch terminal
• Switch
not installed
properly.
, Warped
stem on float, not contacting
the actuator
blade,
, Float support
restricts
free float movement.,
° Check
if the float support
is cracked
. Food or foreign
material
restricting
free float movement.,
• If the rubber ca
lost(See
Figure 7
To Remove
Or Replace
Float Switch
1, Disconnect
dishwasher
from electrical
supply.
2,
Remove
electrical
leads to float switch,
Take down the switch from float support,,
4.
Install new float switch and reverse procedures
to complete
repairs
(See figure 6),,