ANZ Fastpay Podręcznik użytkownika - Strona 5

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Czytnik kart ANZ Fastpay. ANZ Fastpay 13 stron.

A NZ FA S TPAY U S E R G U I D E

CHARGING YOUR CARD READER

Before you attach your card reader to your smartphone or tablet, you

need to fully charge your card reader. This should take approximately

1 hour.

To charge your card reader, plug one end of the USB cable into your

card reader and the other into:

• A powered USB port on your computer; or

• A standard USB charger (not supplied).

Once fully charged, your card reader should perform around

230 transactions.

Press and hold the yellow clear key on the card reader to see how

much charge is left. When fully charged, all 4 blue stars across the

top of the PIN pad will light up. When low on charge, only one star

will light up.

PAG E 6

A NZ FA S TPAY U S E R G U I D E

HOW TO GET YOUR ANZ FASTPAY APP SET UP

AND READY TO GO

Step 1:

When your card reader is fully charged, connect your card reader to

your smartphone or tablet by inserting the audio jack into the

headphone socket. You can also use the extension cord to connect

your card reader to your smartphone or tablet. This may make it

easier for you and your customer to use the card reader's PIN pad.

If you have a cover on your smartphone or tablet, you may need

to remove it.

Make sure that the side with the ANZ logo is facing the same way

as your screen, and the PIN pad is sitting along the back of your

smartphone or tablet (see next page).

PAG E 7