Addi-Data MSX-E3711 Szybka instalacja - Strona 2

Przeglądaj online lub pobierz pdf Szybka instalacja dla Przyrządy pomiarowe Addi-Data MSX-E3711. Addi-Data MSX-E3711 8 stron. Ethernet system for length measurement

Drukuj stronę

Connecting the Ethernet system

- Please read the safety precautions (yellow leaflet) first!

- Afterwards, connect your Ethernet system as follows:

A) Connect the Ethernet system to your PC or network using an Ethernet cable

(e.g. CMX-60).

B) Connect the desired functions.

C) Optional: Connect the cable for trigger/synchro signals (e.g. CMX-40) to the Ethernet

system.

NOTICE!

Please ensure that the default IP address of the Ethernet system

(192.168.99.99) is not assigned to another system on your network yet.

Starting the Ethernet system

D) Connect the Ethernet system to the power source using a power supply cable

(e.g. CMX-20).

E) Check the status of the Ethernet system by means of the LED display:

Power On:

Port 0 ACT/Link: - flashes yellow

Port 1 ACT/Link: - flashes yellow

Status:

As soon as the "Status" LED lights green, you can install the software (see page 6).

(A)

Ethernet

ports

(C)

Trigger/

Synchro

(D)

Power

supply

- lights green

- lights yellow

- lights/flashes red

(E) LED display

(B) Incremental counter input

= Power supply is OK

= Ethernet cable is connected to Port 0

= Ethernet cable is connected to Port 1

= Ethernet system is ready for operation

= Ethernet system is booting

= Error while booting

(B) Transducer inputs (0 to 7)

(B) Temperature input (Pt100)

CMX-20

(Power supply cable)