Duerkopp Adler 579 Instrukcja instalacji - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Maszyna do szycia Duerkopp Adler 579. Duerkopp Adler 579 9 stron.

3.3

Aligning and connecting the pedal

Align the pedal 4 laterally on the stand brace 5 so that the middle

–

of the pedal is roughly beneath the needle.

Screw the pedal 4 firmly to the stand brace.

–

Screw the set value initiator 1 firmly to the stand brace.

–

Attach the pedal linkage 3 to the set value initiator 1.

–

Slightly undo clamping screw 2.

–

Adjust the pedal linkage so that when released the pedal 4 is at an

–

angle of about 10°.

Tighten clamping screw 2.

–