Abtus ABT5210 Ri59 Instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przyrządy pomiarowe Abtus ABT5210 Ri59. Abtus ABT5210 Ri59 8 stron. Grooved wear gauge

4.0 Getting Started

The correct gauge must be used for the rail type. For example a Ri60 gauge will give

incorrect readings if used on a Ri59 rail and vice versa.

When picking a measurement point, it is important to consider the following points as they

can cause an inaccuracy;

Location of welds or branding marks.

Excess loose rust, dirt and grease.

Once a suitable measuring position has been chosen, the gauge can be attached to the

rails. The gauge has 3 locating magnets, as shown in Figure 1, which will allow it to stay

connected to the rail; leaving the users hands free to take the measurements.

Figure 1