Duevi EZY-LAN Podręcznik - Strona 9
Przeglądaj online lub pobierz pdf Podręcznik dla Czujniki bezpieczeństwa Duevi EZY-LAN. Duevi EZY-LAN 12 stron. Wireless alarm panel with ethernet + wi-fi + gsm + lte
Również dla Duevi EZY-LAN: Podręcznik użytkownika (4 strony), Podręcznik użytkownika (5 strony)
Drukuj stronę•
Tampering
alarm:
masking) that generate a tampering alarm
•
Panic alarm
•
Silent alarm
•
User events: user enable/disable, password
change, email change events
•
Zone events: events of exclusion/inclusion of
zones
•
Output category: output activation /
deactivation events
•
Scenarios execution: scenarios execution
events
•
Devices:
wireless
reconnection,
failure and firmware update of a device
•
Communications:
lost/restored internet connection, lost/restored
ethernet
connection,
connection
•
System events: panel reboot, programming
modification, radio disturbance, unauthorized
access
•
Power
events:
absent/restored power
•
Logic Execution: events of a logic condition
execution
•
24H alarm
ATTENTION
PUSH notifications, in addition to being
activated on the control panel, must also
be enabled for reception by the user on
his mobile device. To do this, after
logging into the control panel from the
APP, press on your user name (top right)
and select "User settings", then enable
the Reception of push notifications. This
operation cancels reception on another
device on which they were previously
enabled.
12.6 Programs (SETUP)
The PROGRAMS define repetitive operations that
the control panel execute with the programmed
frequency (e.g. every day, only some days of the
week, once a month).
The PROGRAMS page contains the list of all time
programs created.
Pressing the icon
program.
Pressing the icon
settings, where you can change its properties.
•
Program name: is the name with which the
program
is
identified
notifications, events, etc
events
(tampering
disconnection
opening/closing,
masking,
P2P
presence/absence,
lost/restored
low/restored
(trash can) deletes the
(gear) you enter the program
in
all
•
or
Operation: defines what and when to be
executed by the control panel. It can be
executed:
-
-
-
•
Repeat: defines the repetition rate of the
program
-
-
/
-
12.7 Scenarios (SETUP)
A Scenario is a list of Actions (maximum 16) that
the control panel carries out in sequence with a
WIFI
single command.
The SCENARIOS page contains the list of all
created scenarios. Pressing the icon
expands the view of the Actions contained in the
battery,
Scenario.
Pressing the icon
scenario.
Pressing the icon
settings, where you can change its properties.
•
Scenario name: is the name with which the
scenario
notifications, events, etc
•
Action list to execute: this is the sequence of
operations that the control panel performs
each time the scenario is started and may
contain:
-
-
-
Pressing the icon
operation line. It is possible to change the order
of the operation by pressing the double line icon
and dragging the line to the new position.
A Scenario can be started by:
•
Button of a keyfob
•
User through the App
•
Timer Program
•
Logic
NOTE:
In the settings of each user, it can be
defined a limitation to the scenarios that
he can execute (Allowed scenarios).
menus,
An Action (among those already created)
at a certain time
A Scenario (among those already created)
at a certain time
A
User
Limitation
enabling/disabling of the user
everyday
every week on enabled days
every month on a specific day
(trash can) deletes the
(gear) you enter the scenario
is
identified
already defined actions
new actions
waiting times (in seconds)
(trash can) deletes the
with
time
of
(info)
in
all
menus,