Duevi EzyDriveCAM Instrukcja instalacji sprzętu - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja instalacji sprzętu dla DVR Duevi EzyDriveCAM. Duevi EzyDriveCAM 14 stron.

We invite you to read carefully these directions before installing and using this device in order to fully make

1. INTRODUCTION

THE MANUFACTURER SHALL NOT BE LIABLE FOR ANY IMPROPER USE OF THE PRODUCT,

INCORRECT INSTALLATION OR FAILURE TO COMPLY WITH INSTRUCTIONS OF THIS MANUAL

AND THE LAW REGARDING ELECTRICAL SYSTEMS.

DO NOT CLEAN THE CASE WITH ALCOHOL OR OTHER LIQUID CLEANER BUT ONLY WITH A

CLOTH BARELY DAMPENED WITH WATER.

IN CASE OF FAILURE OF THE DEVICE DO NOT TRY TO REPAIR IT YOURSELF BUT BRING TO THE

NEAREST AUTHORIZED SERVICE CENTER.

E E E E zyMegaCAM

zyMegaCAM is a megapixel camera with recording storage on board that can be questioned by a vision

zyMegaCAM

and programming software (EzyViewCAM) through locale network, power line (HomePlug® system) or

remote connection (WEB).

It can be visualized and programmed by EzyTV also, for management without PC.

The non-volatile memory inserted in the device (up to two SD card) make possible to store the video

directly in MPG4 format, therefore it is not needed any server or additional video recorder.

The rechargeable backup battery allows to record even in case of power supply 12 V

The EzyMegaCAM are equipped of:

• alarm input: NC at +12 V

• open-collector output useful for command a device from remote

• onboard IR detector, for detect the presence of strangers and activate the video recording

• light sensor: EzyCAM defines day and night, adapting the C-MOS sensor parameters for having

always the best image quality during day and night.

Thank you for choosing our product.

the most of all its capacities.

lack.