Cascade 120K Instrukcja instalacji - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Wózki widłowe Cascade 120K. Cascade 120K 10 stron. Fork positioner/sideshifter
Również dla Cascade 120K: Podręcznik użytkownika (20 strony)

Drukuj stronę

NOTE: UL Classified Kits require installation by qualified

personnel only without major disturbance, cutting, splicing or

soldering of factory installed wiring.

WARNING: To reduce risk of fire, replace only

with the same type and ratings of fuse. The

fused power cable is polarity sensitive. The

positive wire must be connected to a positive

power source.

Connect wires from the control handle switch and solenoid

valve terminals to the truck electrical system. The fuse

must be connected to an unswitched positive terminal. The

solenoid must be able to energize with the truck key in the

off position.

Operation

• Sideshift left and right several times.

• Engage the fork position function by pressing the solenoid

button. Open and close the forks several times.

• Check for operation in accordance with ANSI standards

shown below.

• Check for leaks at the fittings, valve and cylinders.

GA0010.eps

Tilt Forward

Hoist Down

Hoist Up

Tilt Back

Control Handle Switch–

Use Control Knob Kit 6823292 (12V) OR 6823293 (24V-48V)

Low Profile Switch Kit 6818564 (12V) OR 6818622 (24V-48V)

Diode

Solenoid

Valve

FP0870.eps

SIDESHIFT and

SOLENOID ACTIVATED

FORK POSITIONING

A Sideshift Left – Forks Out (press button)

B Sideshift Right – Forks In (press button)

Fuse

Unswitched

Truck

Fuse Block

Truck

Battery

AC1212.eps