3onedata RACK4000 Instrukcja szybkiej instalacji

Przeglądaj online lub pobierz pdf Instrukcja szybkiej instalacji dla Stojaki i stojaki 3onedata RACK4000. 3onedata RACK4000 2 stron. Protocol converter/bridge/serial port to fiber modem 4u rack

Drukuj stronę
RACK4000
Protocol Converter/Bridge/Serial
Port to Fiber MODEM 4U Rack
Quick Installation Manual
3onedata Co., Ltd.
Address:
3/B, Zone 1, Baiwangxin High Technology
Industrial Park, Song Bai Road, Nanshan
District, Shenzhen, 518108, China
Website:
www.3onedata.com
Tel:
+86 0755-26702688
Fax:
+86 0755-26703485
【Package Checklist】
Please check whether the package and accessories are intact
while using the rack for the first time.
1.
4U rack x 1
2.
AC power supply cord
3.
Certification
4.
Quick installation manual
5.
Warranty card
If any of these items are damaged or lost, please contact our
company or franchisers, we will solve it ASAP.
【Product Overview】
The product is a 16 slots card protocol converter/bridge/serial
port to fiber MODEM 4U rack. The model is RACK4000 (16
slots card).
【Panel Design】
Main view
Rear view
1.
Handle
2.
Power supply indicator
3.
Location hole of rack mounting
4.
Power supply module
5.
AC power supply input socket
6.
DC power supply input terminal block
7.
Baffle plate (placing card device)
【Mounting Dimension】
Unit: mm
Notes before mounting:
Don't place or install the device in area moist or near
water, keep relative humidity of the device surroundings
between 5%~95% without condensation.
Before power on, first confirm the supported power
supply specification to avoid over-voltage damaging the
device.
The device surface temperature is high after operation;
please don't directly contact to avoid scalding.
【Rack Mounting】
Mounting the Device
Step 1
Select the device mounting position to ensure
enough dimension.
Step 2
Place the device on the surface plate of rack, and
adopt 4 screws to install mounting lugs in the left
and right side to the rack.
Step 3
Check and confirm the product is firmly installed
on the rack, and then mounting ends.
Disassembling the Device
Step 1
Power off the device.
Step 2
Unscrew the fixing screw of mounting lug in the
rack.
Step 3
Remove the device from rack, disassembling
ends.
【Power Supply Connection】
AC power supply input