Dugena 6T51 Instrukcja obsługi - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Oglądaj Dugena 6T51. Dugena 6T51 15 stron. Mechanical watch with automatic winding

2. Time setting for watches with screw crown

1. Unscrew crown by turning in an anti-clockwise direction.

2. To set the time. Pull out crown to position (2) and turn crown in either direction

until hour/minute hands are at the correct time.

3. To push the crown into position (O) lock the screw crown on by pushing and

turning in a clockwise direction until tight.

Please note that your watch is only waterresistant if the crown is properly screwed

on!

3. Avoid high temperatures

Please avoid leaving your watch in direct sunlight or at very warm locations for long

periods. This could cause the watch to malfunction (and shorten the Iife of the bat-

tery of quartz watches). Neither should you leave your watch in very cold locations

for long periods. This could cause the watch to go faster or slower. Put your watch

back on so as to restore its original accuracy if it starts to go fast or slow.

4. Avoid damp environments

Do not use the buttons if the watch is wet or damp.

5. Avoid heavy impacts

This watch is able to withstand all impacts normally occurring during play or sport.

However, you should avoid dropping your watch on the ground or exposing it to

excessive shocks in other ways.

6. Avoid strong magnetic fields

Keep your watch out of the direct area of strong magnetic fields. In general how -

ever, the function of your watch is not impaired by the magnetic fields emitted by

domestic appliances, TV sets or stereo equipment.

7. Avoid strong chemicals, solvents and gases

Do not wear your watch in the vicinity of strong chemicals, solvents or noxious

gases. If your watch comes into contact with substances containing petrol, paint

thinners, alcohols, cosmetic sprays, nail varnish, nail varnish removers, adhesives,

paints or paint strippers, this could impair the quality of or damage the case, strap,

bracelet or other components of the watch.

8. Keep your watch clean

Use a soft, clean cloth to wipe off all traces of water and moisture on the case, glass,

strap or bracelet. Dirt of any type on the case, strap or bracelet could result in slight

skin rashes. A watch bracelet or strap accumulates slight dirt as the result of de -

posited perspiration and dust since it is constantly in contact with the skin.

Even a stainless steel or gold-plated bracelet could start to corrode if it is not

cleaned for long periods.