AOC 17" FT700 Podręcznik użytkownika - Strona 5

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Monitor AOC 17" FT700. AOC 17" FT700 13 stron. 43.2cm(17") crt monitor
Również dla AOC 17" FT700: Specyfikacja techniczna (1 strony), Podręcznik (6 strony)

Drukuj stronę

Plug & Play DDC1/2B Feature

This monitor is equipped with VESA DDC1/2B capabilities according to the VESA

DDC STANDARD. It allows the monitor to inform the host system of its identity and,

depending on the level of DDC used, communicate additional information about its

display capabilities. The communication channel is defined in two levels, DDC1 and

DDC2B.

The DDC1 is a unidirectional data channel from the display to the host that

continuously transmits EDID information. The DDC2B is a bidirectional data channel

based on the I²C protocol. The host can request EDID information over the DDC2B

channel.

THIS MONITOR WILL APPEAR TO BE NON-FUNCTIONAL IF THERE IS

NO VIDEO INPUT SIGNAL. IN ORDER FOR THIS MONITOR TO

OPERATE PROPERLY, THERE MUST BE A VIDEO INPUT SIGNAL.

This monitor meets the Green Monitor standards as set by the Video Electronics

Standards Association (VESA) and/or the United States Environmental Protection

Agency (EPA) and The Swedish Confederation Employees ( NUTEK ). This feature is

designed to conserve electrical energy by reducing power consumption when there is

no video input signal present. When there is no video input signal this monitor,

following a time-out period, will automatically switch to an OFF mode. This reduces

the monitor's internal power supply consumption. After the video input signal is

restored, full power is restored and the display is automatically redrawn. The

appearance is similar to a "Screen Saver" feature except the display is completely off.

The display is restored by pressing a key on the keyboard, or clicking the mouse.

USING THE RIGHT POWER CORD:

The accessory power cord for the Northern American region is the wall plug with

NEMA 5-15 style and is UL listed and CSA labeled. The voltage rating for the power

cord shall be 125 volts AC.

Supplied with units intended for connection to power outlet of personal computer:

Please use a cord set consisting of a minimum No. 18 AWG, type SJT or SVT three

conductors flexible cord. One end terminates with a grounding type attachment plug,

rated 10A, 250V, CEE-22 male configuration. The other end terminates with a

molded-on type connector body, rated 10A, 250V, having standard CEE-22 female

configuration.